SERVICE TEST PROGRAM
4 - 1
N
Y
DISPLAY
button pressed?
PLAY
button pressed?
N
Y
All the icon and segment
will light on.
DISPLAY TEST FACTORY RESET
VERSION
CHECK
Grid change
(MCD196 version 98 only)
N
Y
All the content of the
EEPROM (Main board
and Mpeg board)
will be erased
Software Version is
also display on the
TV screen.
MCD196_98_V001
:
The model number is MCD196.
Software version is V0.01.
Sale region is 98
LCD shows
software version.
MCD196_98_V001
N
Y
<< TUNING
button pressed?
STOP
button pressed?
Default is 9K for
version 98, 10K for
version 55.
Press << TUNING will
set version 98 to 10K,
version 55 to 9K.
To enter Service Mode,
press
PLAY & STOP buttons
together, then plug in.
the LCD will display
D196 98 0.01
SERVICE
Servo code version
E.g. “SO3SO3-SLM-854B”
All settings will be restored to the
factory default. Ex: region code.
Password will also restore to factory
default and the password will be unlocked.
To Next Page
Loading...
