32
10 Product
information
Note
Product information is subject to change •
without prior notice.
Specifications
Amplifier
Rated Output Power 2X20W + 60W RMS
Frequency Response 20 -20000 Hz, -3dB
Signal to Noise Ratio >67dB
Aux Input 0.5V RMS 20k ohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Video Decoding MPEG-1 / MPEG-2 /
DivX
Video DAC 12Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N >48dB
Audio DAC 24Bits / 96kHz
Total Harmonic
Distortion
<0.1% (1 kHz)
Frequency
Response
4Hz - 20kHz (44.1kHz)
4Hz - 22kHz (48kHz)
4Hz - 24kHz (96kHz)
S/N Ratio >67dBA
For audio players with headphone •
sockets:
Connect a 3.5mm audio cable to
the MP3 LINK socket and to the
headphone socket on the audio
player.
3 Select the MP3 Link/AUX source.
4 Start play on the audio player.
Record to a digital recorder
You can record audio from this unit to a digital
recorder.
1 Connect a coaxial cable (not supplied) to:
the • COAXIAL OUT socket
the digital input socket on the digital •
recorder
2 Play audio to be recorded.
3 Begin to record on the digital recorder
(see the digital recorder user manual).
DIGITAL IN
EN
To Next Page
Loading...
