EasyManua.ls Logo

Philips MCD388/12 - Connection and File Compatibility Issues

Philips MCD388/12
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
The formats of these files are not •
supported.
USB device or SD/MMC card not supported
The USB device or SD/MMC card is •
incompatible with the apparatus. Try
another one.
Timer does not work
Set the clock correctly. •
Switch on the timer. •
Clock/timer setting erased
Power has been interrupted or the power •
cord has been disconnected.
Reset the clock/timer. •
Moisture has condensed inside the •
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
As a power-saving feature, the system •
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
Poor radio reception
Increase the distance between the Micro •
System and your TV or VCR.
Fully extend the FM antenna. •
Connect an outdoor FM antenna instead. •
Wireless connection fails.
Set up wireless connection manually. •
Unable to select Progressive Scan
Ensure the video output mode is set to •
[Pr/Cr Pb/Cb Y].
No sound on HDMI connection.
You may not hear any sound if the •
connected device is non-HDCP
compliant or only DVI-compatible.
No picture on HDMI connection.
Check if the HDMI cable is faulty. Replace •
a new HDMI cable.
If this happens when you change the •
HDMI video resolution, select the correct
resolution until the picture appears.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or •
subtitles in multiple languages.
The audio or subtitle language setting is •
prohibited on the disc.
Cannot display some files in USB device or
SD/MMC card
The number of folders or files in the USB •
device or SD/MMC card has exceeded a
certain limit. This phenomenon is not a
malfunction.
EN