EasyManua.ls Logo

Philips MCM390/22 - Tuning to Preset Radio Stations; Rds; Setting the RDS Clock

Philips MCM390/22
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
English
Tuning to preset radio stations
Press 4 or 3 until the desired preset station is
displayed.
RDS
Radio Data System is a service that allows
FM stations to show additional information. If
you are receiving a RDS station, and the
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
Scrolling through different RDS
information
Press CLOCK SET / RDS briefly and
repeatedly to scroll through the following
information (if available):
Station name
Radio text messages
Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1 Tune to a RDS station (refer to “Tuning to radio
stations”).
2 Press CLOCK SET / RDS for more than two
seconds.
"SEAR TM" is displayed.
When RDS time is read, "RDS" and RDS time
value are displayed and the current time will be
stored.
Note:
Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
Radio Reception
pg 001-021_M390_22-Eng 2/2/05, 13:1115

Related product manuals