12
MML1801
CONNECTING TOUCHSCREEN (OPTIONAL)
If your monitor has this optional feature, connect the monitor’s RJ11-4 serial port to the computer’s 9-pin
RS-232 serial port using the proper cable (see fi g. 12b)
fi g. 12b
NOTE: Follow the instructions included on the enclosed CD for installing the Touchscreen drivers on
your system. Following driver software installation, calibrate your Touchscreen to the system following the
procedure described on the enclosed CD.
I
O
G
R
B
G
R
B
I
O
CONNECTING DIGITAL VIDEO (DVI)
With the power the computer and the monitor turned off, connect the supplied video cable from the monitor
to the computer’s video port (see fi g. 12a)
fi g. 12a
To Next Page
Loading...
