Philips MML1801 Series - OSD Position; (OSD) Vertical Position

24
MML1801
Normal
Double
OSD Size
6.5.4 OSD Size
1) Press Enter button when the OSD Size is highlighted on OSD Settings.
The OSD Size window appears.
2) Press the Adjust + or Adjust - button until the desired item is highlighted.
Normal Standard dimensions
Double Double dimension
3) Press the Enter button to confi rm your selection and return to OSD Settings window
6.5.3 OSD Vertical Position
1) Press Enter button when the Vertical Position is highlighted on OSD Position.
The Vertical Position bar appears.
Horizontal Position
Vertical position
Exit
OSD Position
2) Press Enter button and Adjust + or Adjust - button to move UP or DOWN the OSD image .
3) When the position is adjusted, press the Enter button to return to OSD Position window
4) Select Exit and press again Enter button to return to OSD Settings.
Horizontal Position
Vertical position
Exit
OSD Position
2) Press Enter button and Adjust + or Adjust - button to move the OSD image to RIGHT or to the LEFT.
3) When the position is adjusted, press the Enter button to return to OSD Position window
4) Select Exit and press again Enter button to return to OSD Settings.
6.5.2 OSD Horizontal Position
1) Press Enter button when the Horizontal Position is highlighted on OSD Position.
The Horizontal Position bar appears.