Diagnostic Software
EN 51DVDR615, MRV640 5.
System (SYS)
ZZ Byte containing 8 bit fields for
TRUE/FALSE :
BIT 0: Decoder
BIT 1: Modulation
BIT 2: NICAM
SAP
BIT 3: Satpreset
BIT 4: Presetdefined
Channelpreferred
BIT 5: ExtPreset
BIT 6: NameManuallyChanged
BIT 7: ChannelPreset
NICAM/stereo bit for Europe
SAP/stereo bit for NAFTA
Preset defined bit is only used for Europe. For NAFTA, it is
renamed as channelpreferred to indicate if a channel is pre-
ferred or not.
TRUE if preset is defined from P50 as extern [TGA]
HH HfSystemFineTuning HfS: 4 bit, FT: -4,...,4
IIJJKKLLMM Netname Range: A,..,Z,0,..,9,_,.. Netname length exists for Europe
only.
‘II’ is the HEX-value for the first character, ‘JJ’ for the sec-
ond, Ö
The message string of (DS_MessageDef *msgString) should be in the format:
“X(XXX)_VVWW_ZZ_HH_IIJJKKLLMM”.
Here will be ‘X(XXX)’ a decimal value in the range of 0 to 255.
V, W, Z, H, I, J, K, L, M are hex values with out the prefix ‘0x’ (in the range 0... 9,A ... F)
“ _” Denotes a space character.
Remarks:
CHANNEL_SYSTEM is for NAFTA.
PRESET_SYSTEM is for Europe.
Nucleus Name DS_ANAB_StoreExternalPresets
Nucleus Number 1121
Description Store the external presets in NVRAM
Technical Send command P_DS_ANACOM_STORE_EXT_PRESETS with no parameters to
the analogue board and read back the result
Execution Time Less than 1 second
User Input None
Error Number Description
112100 Storing the external presets in NVRAM succeeded
112101 Storing the external presets in NVRAM failed
112102 There was an error communicating with the analogue board
112103 The analogue board returned an unexpected result
Example DS:> 1121
112100:
Test OK @
Nucleus Name DS_ANAB_BargraphLevelAdjust
Nucleus Number 1122
Description Measure the audio signal corresponding to 0dB per channel and store it as correction
value in NVRAM
Technical Send command P_DS_ANACOM_BARGRAPH_LEVEL_ADJUSTMENT with no pa-
rameters to the analogue board and read back the result
Execution Time Less than 1 second
User Input none
Error Number Description
112200 Storing the bargraph adjustment values in NVRAM succeed-
ed
112201 Storing the bargraph adjustment values in NVRAM failed
112202 There was an error communicating with the analogue board
112203 The analogue board returned an unexpected result
Example DS:> 1122
112200:
Test OK @
Nucleus Name DS_SYS_HardwareVersionGet
Nucleus Number 1200
Description Get the hardware version and type of the digital board
To Next Page
Loading...
