11
English
Connections
Step 1: Set up the surround
speakers
1 Before connecting the speakers to the DVD
system, firmly attach the mini speaker stands to
the surround speakers using the supplied screws.
OR
2 Alternatively, you can choose to mount the
speakers on the wall. Attach the supplied
bracket firmly to the rear of speakers using the
supplied screws. Then mount a screw (not
supplied) on the wall where the speaker is to be
hung and hook the speaker securely onto the
mounted screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO NOT
do it by yourself to avoid unexpected
damage to the equipment or injury to
personnel.
Note:
– The surround speakers are labeled as REAR L
(left) or REAR R (right).
1 OR 2
Step 2: Set up the front
speakers with the
subwoofer stands
The connections between front speakers and
DVD system are through the twin subwoofer
stands.
1 Attach the left front speaker to the left
subwoofer stand and right front speaker to the
right subwoofer stand.
2 To disconnect speaker from the subwoofer
stand, press the button at the rear of subwoofer
stand while pulling up the speaker.
Note:
– The front speakers are labeled as FRONT L
(left) or FRONT R (right).
subwoofer
stand
front
speaker
1
2
mini speaker
stand
screws
To Next Page
Loading...
