19
English
Step 3: Setting the TV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See page 12
“Connecting TV”).
1 Adjust SOURCE control until “DISC X”
appears on the display panel (or press
DISC/MEDIA on the remote).
2 Turn on the TV and set to the correct video-in
channel. You should see the blue Philips DVD
background screen on the TV.
➜ Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details.
➜ Or, you may go to channel 1 on your TV,
then press the Channel down button
repeatedly until you see the Video In channel.
➜ Or, the TV remote control may have a
button or switch that chooses different video
modes.
Changing the NTSC/PAL setting via
the remote control
TV/AV
DISC/
MEDIA
TUNER
AUX/DI
456
123
1 2
,
1 Press DISC/MEDIA on the remote to enter
disc mode.
➜ Make sure no MP3 or picture (Kodak, JPEG)
disc is in disc tray 1.
➜ Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press Ç to stop playback.
2 Press and hold DISC/MEDIA on the remote
until “PAL” or “NTSC” appears on the display
panel.
➜ To change the setting, repeat step 2.
Selecting the colour system that
corresponds to your TV
This DVD system is compatible with both NTSC
and PAL. In order for a DVD to play on this
DVD system, the colour system of the DVD, the
TV and the DVD system should match.
1 In disc mode, stop playback and press
SYSTEM MENU.
2 Select icon and press 4.
3 Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
Move to and press 2.
Move to ‘TV System’ and press 2.
Auto – Select this if the connected TV is
compatible with both NTSC and PAL (multi-
system). The output format will be in
accordance with the video signal of the disc.
NTSC – Select this if the connected TV is
NTSC system. It will change the video signal of
a PAL disc (VCD only) and output to NTSC
format.
PAL – Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4 Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
To Next Page
Loading...
