15
English
3139 115 21511
BASS/TREBLE
The BASS (low tone) and TREBLE (high tone)
feature enables you to define the sound-
processor settings.
● Adjust BASS or TREBLE (BASS+/- or
TREBLE+/-) to select the next Bass or
Treble level.
➜ "BASS XX" or "TREBLE XX" is displayed.
"XX" denotes the level as follows :
-3 ™ -2 ™ -1 ™ 0 ™ +1 ™ +2 ™ +3
LOUDNESS
Special sound effect that provides some kind of
bass, treble accentuation effect specially for low
volume level. It can be switched on additionally
to all sound settings.
● Press LOUDNESS.
➜ If activated, LOUDNESS is shown and
“LOUDNESS ON” is displayed.
➜ If deactivated, “LOUDNESS OFF” is
displayed.
FLAT
This feature allows you to temporarily switch off
all the digital sound control setting
(for example, BASS, TREBLE, INCREDIBLE
SURROUND)
● Press FLAT to switch off all the digital sound
control setting.
➜ FLAT is shown and “FLAT ON” is displayed.
● To restore the previous setting, press FLAT
again.
➜ “FLAT OFF” is displayed.
Basic Functions
pg 001-030_MZ9_22-Eng 1/23/02, 1:59 PM15
To Next Page
Loading...
