30
English
3139 115 21511
Troubleshooting
GENERAL
The system does not react when buttons – Remove and reconnect the AC power plug and
are pressed. switch on the system again.
Sound cannot be heard or is of poor – Adjust the volume.
quality. – Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
The left and right sound outputs are – Check the speaker connections and location.
reversed.
The remote control does not function – Select the source (CD or TUNER, for example)
properly. before pressing the function button (É,í,ë).
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly towards the IR
sensor.
The timer is not working. – Set the clock correctly.
– Press and hold CLOCK/TIMER to switch on the
timer.
– If recording or tape dubbing is in progress, stop
recording.
Not all lighted buttons are showing light. – Press DIM to select DIM OFF display mode.
The Clock/Timer setting is erased. – Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features – Press and hold STOP on the system to switch off
automatically and buttons start flashing. the demonstration.
pg 001-030_MZ9_22-Eng 1/23/02, 2:00 PM30
To Previous Page
Loading...
