shaving
- This symbol on the appliance indicates that
the appliance can be used in both the bath and
shower.
- Use this appliance for its intended household use
as described in this manual.
- Only use the shaving attachment to shave facial
hair.
Tip: You can shave wet with shaving cream or
gel or dry for convenience and quick touch-ups
between shaves. Shaving with a clean face
gives best results.
1 Attach shaving unit to appliance. Do not twist.
Dry Shaving
1 Turn appliance ON.
2 Gently press the shaving unit to skin. Move
shaving unit using both straight and circular
movements.
3 Turn appliance OFF.
4 Clean shaving unit after each shave (see
‘Cleaning’).
English
12
5 Put Protective cap on appliance.
Wet Shaving
1 Splash warm water on your face.
2 Apply shaving cream or gel to your skin.
3 Rinse shaving unit under water.
4 Turn appliance ON.
5 Gently press razor to skin. Move the razor in
circular movements.
Tip: Rinsing the shaving unit with water before
and during shaving ensures the razor heads
glide smoothly over your skin, while removing
residual shaving foam/gel. Gently press razor to
skin for optimal results. Stretching your skin
can help prevent skin irritation.
English
13
To Next Page
Loading...
Need help?
General
