Philips PET941D - Installing Remote Control Battery; Connecting Additional Equipment

16
Install remote control battery
Caution
5LVNRIH[SORVLRQ.HHSEDWWHULHVDZD\IURPKHDWVXQVKLQHRUÀUH1HYHUGLVFDUG

EDWWHULHVLQÀUH
Risk of decreased battery life! Never mix different brands or types of batteries.

Risk of product damage! When the remote control is not used for long periods, remove

the batteries.
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/

perchlorate.
)RUÀUVWWLPHXVH
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Connect additional equipment
Caution
Turn off your player before connecting to any additional equipment.

<RXFDQFRQQHFWWKHSOD\HUWRD79RUDQDPSOLÀHUWRHQMR\'9'VRU
Karaoke.
Match the color of the AV cables (the AV cable connected to TV is not
supplied) with the jacks: the yellow cable is for the yellow video jack, the red/
white cable is for the red/white audio jacks.
EN