Philips Push SHB3075 - Use Your Headphones; Connect the Headphones to a Bluetooth Device; Manage Your Calls and Music

6
EN
4 Use your
headphones
Connect the
headphones to a
Bluetooth device
1
Turn on your mobile
phone/Bluetooth device.
2
Press and hold to turn the
headphones on.
» The blue LED ashes.
» The headphones are
reconnected to the
last connected mobile
phone/Bluetooth device
automatically. If the last one is
not available, the headphones
try to reconnect to the second
last connected device.
Tip
• If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature
after turning on the headphones, you have
to reconnect the headphones and mobile
phone/Bluetooth device manually.
Note
• If the headphones fail to connect to any
Bluetooth device within range in 5 minutes,
it will switch o automatically to save the
battery life.
Manage your calls and
music
On/o
Task Button Operation
Turn the
headphones
on.
Press and
hold for 3
seconds.
Turn the
headphones
o.
Press and
hold for 5
seconds.
» The white
LED is on
and fades
out.
Music control
Task Button Operation
Play or pause
music.
Press once.
Adjust
volume.
+/- Press
once/press
and hold.
Skip forward. + Press
twice.
Skip
backward.
- Press and
hold for 3
seconds.
Call control
Task Button Operation
Pick
up/hang
up a call.
Press once.
» 1 beep.
Switch
caller
during a
call.
Press and
hold for 3
seconds.