Philips Q-Line 55BDL3010Q - 2 Parts and Functions; Control Panel

3
2. Parts and Functions
2.1. Control Panel
MUTE INPUT
MENU
1 2 3 4 5 6 7 8
9
1
[ ] button
TurnthedisplayOnorturnthedisplaytostandbymode.
2
[MUTE] button
Mutethesoundorreactivatesound.
3
[INPUT] button
Selectaninputsource.
4
[ ] button
• Increasetheaudiooutputlevel
• EnterintothesubmenuwhileOSDmenuison
5
[ ] button
• Decreasetheaudiooutputlevel
• BacktopreviousmenuwhileOSDmenuison
6
[ ] button
• MovetheselecteditemonelevelupwhiletheOSDmenuis
On
• Increasetheadjustment.
7
[ ] button
• MovetheselecteditemoneleveldownwhiletheOSDmenuis
On.
• Decreasetheadjustment.
8
[MENU] button
ReturntothepreviousmenuwhiletheOSDmenuisOn.This
buttoncanalsobeusedtoactivatetheOSDmenuwhentheOSD
menuisOff.
9
Remote control sensor and power status indicator
• Receivescommandsignalsfromtheremotecontrol.
• IndicatestheoperatingstatusofthedisplaywithoutOPS:
- LightsgreenwhenthedisplayisturnedOn
- Lightsredwhenthedisplayisinthestandbymode
- When{SCHEDULE}isenabled,thelightblinksgreenandred
- Ifthelightblinksred,itindicatesthatafailurehasbeen
detected
- Lightsoffwhenthemainpowerofthedisplayisturnedoff
* Use an IR sensor cable for better remote control performance.
(Please refer to the instructions of 3.5)