Philips S9311 - Step 7: Reassemble Cutter into Comb; Step 8: Reassemble Shaving Head Holder; Step 9: Reattach Retaining Ring; Step 10: Repeat for Other Rings

ENGLISH
C 8 Put the shaving head back into the shaving
head holder.
Make sure the notches on both sides of the
shaving head fit exactly onto the projections in
the shaving head holder.
C 9 Place the retaining ring holder on the
retaining ring (1), place it on the shaving
head (2) and turn clockwise (3) to reattach
the retaining ring.
10 Repeat the process for the other two
cutters and combs.
C 11 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
Cleaning the Trimmer
Clean the trimmer after each use.
C 1 Attach the trimmer to shaver.
2 Turn shaver ON.
32
1
3
2
1
2
14_S9531_S9311.indd 32 12/15/14 2:41 PM