Philips S9311 - Step 8: Reassemble Shaving Head Holder; Step 9: Reset Shaver Settings; User-Serviceable Parts Information; Replacing SmartClean System Cleaning Cartridge

ENGLISH
C 8 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
C 9 To reset the shaver, press and hold the On/
Off button for approximately 7 seconds.
You will hear 2 beeps.
This shaver/SmartClean System has no other
user-serviceable parts. For assistance call 1-800-
243-3050.
Replacing the SmartClean System
Cleaning Cartridge
C ◗ For optimal cleaning results, replace the
cleaning cartridge when the replacement
indicator blinks orange or every 3 months.
C 1 While holding the SmartClean System
with one hand, press the cartridge release
button on the side of the SmartClean
System (1) and lift the SmartClean System
(2).
35
1
2
7 se
c.
1
2
14_S9531_S9311.indd 35 12/15/14 2:41 PM