Philips SB365B - Other Features; Charge Mobile Devices; Listen to External Device; Adjust Volume

8 EN
5 Other features
Charge your mobile devices
With this speaker, you can charge your mobile
devices through the CHARGING socket.
Note
• The USB socket is used for charging only.
• If the speaker is powered by the built-in battery or in
standby mode, you cannot charge your mobile devices.
• Connect to your mobile device with a USB
cable (not supplied).
» Once the device is recognized, the
charging starts.
Listen to an external device
With this speaker, you can also listen to an
external audio device such as an MP3 player.
Note
• Make sure that music playback through Bluetooth is
stopped.
CHARGING
1 Connect the supplied audio input cable to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
2 Play audio on the external device (refer to
its user manual).
Adjust volume
During play, press VOL + or - VOL to increase
or decrease volume.
Tip
• When the volume reaches the maximum or minimum,
the white LED indicator on the buttonashesfor
one second.