Philips SB365B - Play from Bluetooth-enabled Devices; Connect a Device; Connect via NFC; Connect Manually

6 EN
4 Play from
Bluetooth-
enabled devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
Connect a device
Note
• The speaker can memorize a maximum of four paired
devices.Thefthpaireddevicewillreplacetherstone.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
• The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
• Make sure that no audio input cable is connected to
the AUDIO IN socket.
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1 Press to turn on the speaker.
» The Bluetooth indicator begins to
ash.
2 Enable the NFC feature on your Bluetooth
device (see the user manual of the device
for details).
3 Tap the NFC tag on the speaker with the
NFC area of your Bluetooth device.
4 On your Bluetooth device, accept the
pairing request with "SB365B". If necessary,
input "0000" as the pairing password.
5 Follow the on-screen instructions to
complete the pairing and connection.
» After successful pairing and connection,
the speaker beeps twice, and the
Bluetooth indicator turns solid blue.
Option 2: Connect a device manually
1 Press to turn on the speaker.
» The Bluetooth indicator begins to
ash.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3 When [Philips SB365B] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password “0000”.
» After successful pairing and connection,
the speaker beeps twice, and the
Bluetooth indicator turns solid blue.
• If you fail to find [Philips SB365B]
for pairing, press and hold for two
seconds to enter pairing mode.