Philips SE255 - Using the Redial List; Access Redial List; Save a Redial Number into the Phonebook; Delete a Redial Number

22
Use more of your phone
scroll n to DIRECT MEM. and
press o.
2 Scroll n to KEY 1 or KEY 2 and
press o.
• The stored number is displayed
(if any).
3 Press m to enter direct memory
menu.
4 Scroll n to DELETE and press
o.
5 CONFIRM? is displayed on the
screen.
6 Press o to confirm deletion.
• A validation tone is emitted and
the screen returns to the
previous menu.
5.6 Using the Redial list
The redial list stores the last 10 numbers
dialed. A maximum of 24 digits can be
displayed for each entry.
5.6.1 Access Redial list
1 Press r to go to the redial list
and scroll n to browse the redial
list.
• The last number dialed will
appear first in the redial list. If
the redial number matches a
phonebook entry, the name will
be displayed instead.
Press c to return to idle mode.
5.6.2 Save a redial number into the
phonebook
1 Press r in idle mode, scroll n to
select an entry and press o, press
o to enter SAVE NUMBER.
2 ENTER NAME is displayed on the
screen.
3 Enter the name of the contact
(maximum 12 characters) and press
o.
4 ENTER NUMBER is displayed
and the selected number from the
redial list appears in the number
field. At this time you can edit the
number if you wish to.
5 Press o.
• A validation tone is emitted and
the screen returns to redial list.
Press c to delete the last digit or
character entered. Or long press to
delete all.
5.6.3 Delete a redial number
1 Press r in idle mode, and scroll
n to an entry.
2 Press o to enter the Redial list
options.
3 Scroll n to DELETE and press
o.
4 DELETE? is displayed on the
screen. Press o again to confirm
deletion.
• A validation tone is emitted.
Note
Note