EasyManua.ls Logo

Philips SE6591B/17 - Play, Record, or Delete an Outgoing Message; Set the Answer Mode; Turn the Answering Machine On;Off from the Handset

Philips SE6591B/17
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Telephone answering machine (TAM)
15.3 Turn the Answering Machine
On/Off from the Handset
You can turn the answering machine on
or off from the handset as follows.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Answer On/Off and
press o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to select On or Off and
press o Select.
A validation tone is emitted and
the screen returns to Answer
Machine menu.
15.4 Play, Record, or Delete an
Outgoing Message
You can record a personalized message
to be played when the answering
machine picks up an incoming call.
The maximum length of an outgoing
message is 1 minute.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Record OGM and
press o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to select Answer & Rec.
or Answer Only and press o
Select.
5 Scroll n to select Play, Record
Message, or Delete and press o
Select.
If Play is selected, the current
outgoing message is played.
If Record Message is selected,
a beep sounds and message
recording starts automatically.
If Delete is selected and a
personal outgoing message was
previously recorded, Deleted is
displayed. The predefined OGM
is reinstated automatically.
15.5 Set the Answer mode
There are 2 answer modes available:
Answer Only and Answer & Record. By
default, the answer mode is Answer &
Record, which lets your caller leave a
message on the answering machine. This
can be changed to Answer Only mode,
which does not allow your caller to leave
any messages on the answering machine.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Answer Mode and
press o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to select Answer & Rec.
or Answer Only and press o
Select.
A validation tone is emitted and
the screen returns to Answer
Machine menu.
Depending on the answer mode you have
selected, the appropriate default outgoing
Note
Note

Table of Contents

Related product manuals