18
English
Using the SmartClick Nose Trimmer
Trimming nose hair
- Make sure nasal passages are clean.
- Do not insert the tip more than
3/16in/0.5cm.
1 Attach the nose trimmer to the shaver ('click').
2 Turn shaver on.
3 Gently move the tip in and out of nose while
turning it around to remove all unwanted hairs.
4 Turn shaver o when nished.
5 Clean the trimmer thoroughly after each use
(see 'Cleaning').
Trimming ear hair
- Make sure outer ear channels are clean
and free from wax.
- Do not insert the tip more than
3/16in/0.5cm.
1 Attach the nose trimmer to the shaver (‘click‘).
2 Turn shaver on.
3 Slowly move the trimmer along the rim of the ear
to remove hairs that stick out beyond the rim.
4 Insert the trimmer into the outer ear channel.
Be careful not to insert the tip more than
3/16in/0.5cm into your ear channel.
To Next Page
Loading...
