Philips Series 5000 - Cleaning the nose trimmer; Replacing the Shaving Heads

22
English
4 Turn the shaver OFF. Shake o excess water
and allow trimmer to air dry thoroughly.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with one drop of mineral oil
every 6 months.
Cleaning the nose trimmer
Clean the nose trimmer after each use.
1 Make sure the shaver is o.
2 Attach the nose trimmer to shaver.
3 Rinse the cutting element of the trimming head
with warm water.
4 Switch on the shaver and rinse the cutting
element once more to remove any remaining
hairs. Then switch o the shaver again.
5 Carefully shake o excess water and let the
nose trimmer air dry thoroughly.
Tip: For optimal trimmer performance, lubricate the
trimmer teeth with a drop of sewing machine oil
every six months.
Replacing the Shaving Heads
- Replace the shaving heads once a year for
optimal shaving results.
- Replace damaged or worn shaving heads with
model SH50 Philips Norelco shaving heads only.