- Brush head replacement reminder
- Pressure sensor
Step 1: Place the handle on the charging stand or in the
charging glass.
Step 2: Press and hold power button for:
Easy start Brush head
replacement
reminder
Pressure sensor
3 seconds Up to 5
seconds
Up to 7 seconds
¯ ¯ ¯
Step 3: Let go power button when you hear
1 beep 1 beep and
then 2 beeps
1 beep, 2 beeps and
then 3 beeps
¯ ¯ ¯
If you see the battery indication blink white 2 times and
hear 3 tones from low to high, then the feature has
been activated.
OR
If you see battery indication blink white once and hear
3 tones high to low, then the feature has been
deactivated.
Cleaning
- All parts can be cleaned with a damp cloth or rinsed with warm
water.
22
English
To Next Page
Loading...
