Need help?Do you have a question about the Philips SPA20 and is the answer not in the manual?
General| Housing material | - |
|---|---|
| Recommended usage | PC |
| Suitable for outdoor use | No |
| Number of drivers | 2 |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | 2.0 channels |
| Subwoofer driver diameter (imperial) | 2.5 \ |
| Amplifier class | A/B |
| Impedance | 10 Ω |
| Frequency range | 20 - 20000 Hz |
| RMS rated power | 3 W |
| Signal-to-Noise Ratio (SNR) | 75 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Cable length | 1.5 m |
| Channel separation | 45 dB |
| Quick installation guide | Yes |
| Connectivity technology | Wired |
| AC input voltage | 220 V |
| Power source type | USB, AC |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 80 mm |
|---|---|
| Width | 158 mm |
| Height | 121 mm |
| Weight | 601 g |
To Next Page
