Picture controls
3 Full automatic control: on/off
This full automatic control mode provides a very easy way to get the best out of your
Philips SPC 200NC PC Camera. Or you can choose to have maximum manual control over
the camera settings by switching the full automatic control mode off. Full automatic control
'on' is the preferred setting for normal use.
Techniques active within full automatic control mode are:
– Automatic exposure control and automatic white balance control, to provide the best video
source signal possible;
– Automatic frame rate selection for improved camera sensitivity in low light conditions.
4 Brightness
Brightness enables you to adjust the brightness of the displayed image or video to suit your
own preference. Use the slider to find your preferred setting.
5 Contrast
Contrast enables you to control the ratio between dark and light according to your own
preference. Use the slider to find your preferred setting.
6 Gamma
Gamma enables you to brighten dark areas within the displayed image or video and visualize
more details without over-exposing already light areas. Use the slider to find your preferred
setting.
To Next Page
Loading...
