Contents [ hide
1 Important
1.1 Safety instructions
2 SpeechMike Barcode
2.1 Cleaning and disinfection
2.2 Disposal of your old product
3 Your SpeechMike
3.1 What’s in the box
3.2 Overview
4 Get started
4.1 Installation
5 Use your SpeechMike
5.1 Create a recording
5.2 Use the bar-code scanner
(LFH3300/3310)
5.3 Customize the SpeechMike
5.4 Updating your device
6 Troubleshooting
7 Technical data
8 Certifications
8.1 Declaration of Conformity
8.2 CE Declaration of Conformity
8.3 Open-source software
9 File Downloads
10 References
11 Related Manuals
Important
Do not make any adjustments and modifications that are not described in this manual. Follow all safety instructions to ensure the proper
operation of the device. The manufacturer assumes no liability for damages resulting from non-compliance with the safety instructions.
View this user manual
online:
help.speechmike.com/
lfh3200
Safety instructions
Protect the device from rain and liquids to prevent damage to the device or a short circuit.
Do not expose the device to excessive heat caused by placing it on a heating device or in direct sunlight.
Protect the cables from damage by being trapped, particularly at the plugs and where cables exit the housing.
Do not perform any maintenance operations that are not described in this user manual. Do not disassemble the device into its component
parts to carry out repairs. The device may only be repaired in authorized service centers.
All wireless devices may be susceptible to interference, which could affect performance.
Back up your data and recordings. The manufacturer’s warranty does not cover loss of data resulting from user actions.
SpeechMike Barcode
CAUTION
Class 1 laser product
This product complies with:
21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001.
EN60825-1:1994 + A1:2002 + A2:2001
IEC60825-1:1993 + A1:1997 + A2:2001
The laser classification is marked near the scanner window on the product.
To Next Page