- 18 / 26-
a. Click Finish
8.4 Windows Driver installation
A Windows driver installation page will appear if the SpeechMike is connected to that USB
port in firmware upgrade mode the first time.
Windows will aks you to install the “TI DFU class drivers”
If a Firmware Upgrade has already been done on that USB port once continue this steps do
not have to be done.
1. Found new hardware wizard page 1
a. Select “No, not this time”,
b. Click next
2. Found new hardware wizard page 2
a. Select “install from a list or s specific location”.
To Next Page
Loading...
