What to do if Philips Remote Control does not operate my product?
First, select the correct mode for the product you are trying to control. If that doesn't work, try programming the remote with a new code. You might also need to install new batteries, and remember that you may have to reprogram the remote after doing so. If the issue persists, the remote might not be compatible with your product.
How to fix Philips SRU4105WM/17 Remote Control if it does not operate some features of my product?
Try programming the Philips Remote Control with a new code. If this doesn't work, your remote might not be able to operate all the features of your product, or the button names might be different from your product's.
Why Philips Remote Control indicator blinks after programming a product code?
If the indicator blinks after you program a product code, it means the remote did not accept the code. You should try programming the code again or try a different code.
General| Brand | Philips |
|---|---|
| Model | SRU4105WM/17 |
| Number of Devices Controlled | 5 |
| Battery Type | AAA |
| Preprogrammed | Yes |
| Power Source | Battery |
| Wireless Range | Up to 10 meters |
| Infrared | Yes |
| Type | Remote Control |
| Compatibility | TV, DVD |
Turns the selected device on or off.
Used to select the active device mode (TV, VCR, etc.).
Controls the volume level of the selected device.
Changes channels up or down for the selected device.
Initializes setup of the remote and connected devices.
Adjusts the timing for sending digits to ensure proper channel selection.
Step-by-step instructions for inserting batteries into the remote.
Feature that turns off remote after 30 seconds of inactivity.
Assures codes are retained during battery changes.
States the default mode the remote powers on in.
Instructions on how to set up device codes, referencing Code Search.
Method for finding device codes by scanning the remote's library.
Procedure to identify the 4-digit code currently stored for a device.
Provides important advice and considerations for successful code learning.
Enables VCR buttons to control other modes like DVD or DVR.
Manages which device mode controls volume and mute functions.
Allows specific modes to manage their own volume and mute functions.
Step-by-step guide on how to teach the remote new commands.
Resets all learned commands on the remote to their original state.
Steps to diagnose and resolve issues where the remote fails to control a device.
Addresses problems where the remote controls the device but not all features.
Explains the meaning of the blinking indicator and how to proceed.
To Next Page