Philips Streamium NP2900 - Powering On and Standby Modes; Turning On and Switching Standby Modes

12
6 Turn On and
Switch to Active
standby / Eco
standby
You can select from the following status options:
• On (the full display and the remote
control are active, button LED is off)
• Active standby (the clock display and the
remote control are active, button LED
is red)
• Eco standby (the display and the remote
control are deactivated, button LED is
off)
In status On or Active standby,
1 press the on the remote control to
toggle NP2900 between Active standby
and On.
2 press and hold the on NP2900 to
switch to Eco standby.
In status Eco standby,
1 press the button on NP2900 or on the
remote control to turn the NP2900 On.
Note
In stop (idle) mode, if no buttons are pressed •
for 20 minutes, NP2900 switches to Active
standby.
EN