Philips SW200 - Location of PC Boards; Specifications

1-2
LOCATION OF PC BOARDS
SPECIFICATIONS
SUBWOOFER
Subwoofer (not magnetically shielded design).......................................................................................................6.5"
Output Power.........................................................................................................................................75W (4Ω,DIN)
THD (Total Harmonic Distortion) ...................................................................................10% at 80 Hz (output power)
Reproduction Frequency Response.......................................................................................................30 Hz-180 Hz
Phase Switch....................................................................................................................................................0
0
,180
0
Input Sensitivity (Subwoofer In)..................................................................................................................200 mVrms
AC Power (for SW200/17/17S) ..............................................................................................................120V / 60Hz
AC Power (for SW2000/00S/02S/15S)..............................................................................................220-240V / 50Hz
Power Consumption...........................................................................................................53 W (at 1/8 Rated Power)
Dimensions (w x h x d)...................................................................................................135 mm x 337 mm x 375 mm
Weight................................................................................................................................................................7.8 Kg
LED BOARD
POWER BOARD
I/P BOARD
MAIN BOARD