Why is there no sound from my Philips Speaker System soundbar?
If you're not getting any sound from your Philips Speaker System soundbar, ensure the audio cable is connected from the soundbar to your TV or other devices. Also, select the correct audio input on the remote control and make sure that the soundbar is not muted.
What to do if the alarm does not work on my Philips Clock Radio?
If the alarm on your Philips Clock Radio isn't working, make sure that you have set the clock and alarm correctly.
What to do if my Philips Pasta Maker stops with error E2?
If your Philips Pasta Maker stops during processing and displays 'E2' with flashing indicators and an alarm, it could be due to a few reasons. First, the mixing paddle might be blocked by foreign objects; disconnect the appliance, clean it, and restart following the user manual. Alternatively, the dough might be too dry, or the wrong program might have been selected.
How to fix E1 error on Philips Pasta Maker?
If your Philips Pasta Maker displays 'E1' on the screen, it means that either the shaping disc is not attached correctly, or the lid is not properly in place. Make sure to attach the disc holder to the main unit and properly fix the shaping disc and the front panel. Also, ensure the lid is attached properly.
What to do if Philips Pasta Maker stops when lid is opened?
If your Philips Pasta Maker stops working when you open the lid during processing, close the lid properly and press the Start/pause button to resume the previous operation.
Why does my Philips Pasta Maker stop without alarm?
If your Philips Pasta Maker stops during processing without any alarm sounds or flashes, it may have overheated from continuous use. Disconnect it from the power source and allow it to cool down for at least 15 minutes before restarting. To protect the appliance, avoid continuous use for more than 45 minutes.
How to troubleshoot a Philips Pasta Maker that sounds but doesn't work?
If your Philips Pasta Maker isn't working even though you hear sounds after pressing the On/Off button, it's likely that the mixing chamber, shaping disc, or front panel isn't assembled correctly. Refer to the user manual to ensure all parts are assembled correctly.
Why don't the lights turn on on my Philips Pasta Maker?
If the indicators on your Philips Pasta Maker do not light up, check if the power plug is correctly plugged into a working outlet.
What to do if the Philips Speaker System remote control does not work?
If the remote control for your Philips Speaker System isn't working, try these steps: 1. First, select the correct source before pressing any playback control button. 2. Reduce the distance between the remote control and the unit. 3. Make sure you've inserted the battery with the correct polarities (+/-) as indicated. 4. Try replacing the battery. 5. Aim the remote control directly at the sensor on the front of the unit.
General| Brand | Philips |
|---|---|
| Model | TAB7207/98 |
| Category | Electric Shaver |
| Language | English |
To Next Page