Philips TAB8905 - 2 Your Soundbar; Main Unit; Connectors

English
7
2 Your Soundbar
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips offers, register your
Soundbar at www.philips.com/support.
Main unit
This section includes an overview of the main
unit.
d
cab e
0 0 :0 0
f
i
g
h
a - (Volume) button
Decrease the volume.
b + (Volume) button
Increase the volume.
c
(Play/Pause) button
Start, pause or resume play.
d
(Source) button
Select an input source for the Soundbar.
e
(Standby-On) button
Switch the Soundbar On or to standby.
f Remote Control Sensor
g Display panel
h Power LED
i Wi-Fi LED indicator (Yellow)
LED State Status
Blink Wi-Fi AP mode
Double blink WPS is active
Constant on Connected / Pairing successful
Connectors
This section includes an overview of the
connectors available on your Soundbar.
e
f
gdabc
h
a USB
• Audio input from a USB storage device.
• Upgrade software of this product.
b AUX
Audio input from, for example, an
MP3 player (3.5mm jack).
c OPTICAL
Connect to an optical audio output on the
TV or a digital device.
d
(Wi-Fi Setup) button
Trigger Wi-Fi setup for Play-Fi.
Press and hold to
active the Wps or AP
mode and recongure the network
e HDMI OUT (eARC/ARC)
Connect to the HDMI input on the TV.
f HDMI 1/ HDMI 2
Connect to the HDMI input on the TV.
g AC~
Connect to the power supply.
h Wall bracket slot