Philips TAN7506 - User Manual

Questions and Answers

D
David AllenAug 29, 2025
What to do if the alarm does not work on my Philips Clock Radio?
- T
  Tammie MorrisAug 29, 2025
  If the alarm on your Philips Clock Radio isn't working, make sure that you have set the clock and alarm correctly.
T
Theresa DorseyAug 28, 2025
How to improve poor Bluetooth audio quality on Philips Speaker System?
- A
  Alyssa GibsonAug 28, 2025
  If the audio quality from a connected Bluetooth device is poor, it might be due to poor Bluetooth reception. Try moving the device closer to the soundbar or removing any obstacles between them.
K
Kelly WilsonAug 28, 2025
What to do if the buttons on my Philips Speaker System do not work?
- K
  Kayla GrantAug 28, 2025
  If the buttons on the main unit of your Philips Speaker System do not work, disconnect it from the power supply for a few minutes, then connect it again.
D
daniel30Sep 8, 2025
Why is there no sound from my Philips Speaker System wireless subwoofer?
- K
  kleachSep 8, 2025
  If there is no sound coming from the wireless subwoofer of your Philips Speaker System, try the following: * Manually connect the subwoofer to the main unit. * Increase the volume using the Vol+ button on the remote or the + button on the soundbar. * Set the TV output to PCM. * Connect directly to your Blu-ray or other sources, as some TVs may not pass through digital audio. * Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. * If using Bluetooth, ensure the volume on your source device is turned up and the device isn't muted. * If the playback freezes in Wi-Fi mode, check your home network connection.
B
blake65Sep 12, 2025
How to fix no sound from Philips Speaker System soundbar speaker?
- S
  Samuel MaldonadoSep 12, 2025
  If there is no sound coming from the soundbar speaker, try the following: * Connect the audio cable from the soundbar to your TV or other devices. * Select the correct audio input on the remote control. * Ensure that the soundbar is not muted. * You can also reset the product to its factory settings.
S
spachecoSep 15, 2025
What to do if Philips Speaker System subwoofer is idle?
- B
  burchlauraSep 15, 2025
  If the subwoofer is idle or its indicator light is off, unplug the power cord from the mains socket, and plug it back in after 3 minutes to reset the subwoofer.
Z
zsimpsonSep 23, 2025
What to do if the front panel knob is loose on Philips Pasta Maker?
- M
  margaret96Sep 23, 2025
  If the front panel knob on your Philips Pasta Maker is loose, make sure the front panel is securely assembled.
R
Ryan WongAug 26, 2025
How to fix Philips Speaker System buttons on the main unit that are not working?
- M
  marissa48Aug 26, 2025
  If the buttons on your Philips Speaker System main unit do not work, disconnect the system from the power supply for a few minutes, and then connect it again.
M
michaelgarzaAug 26, 2025
What to do if my Philips Speaker System remote control does not work?
- P
  Preston MillerAug 26, 2025
  If your Philips Speaker System remote control isn't working, try these steps: * First, select the correct source before pressing any playback control button. * Reduce the distance between the remote and the unit. * Ensure the battery is inserted correctly, aligning the polarities (+/-) as indicated. * Replace the battery with a new one. * Aim the remote directly at the sensor on the front of the unit.
M
Mark KelleyAug 25, 2025
What to do if a device cannot connect with Philips Speaker System soundbar?
- S
  Steven PowellAug 26, 2025
  If a device can't connect, it might not support the compatible profiles required for the soundbar. Ensure you've enabled the Bluetooth function on the device by checking its user manual. Make sure the device is correctly connected. Also, the soundbar might already be connected to another Bluetooth device; disconnect that device and try again.

The Philips 7000 Series TAN7506 are Bluetooth wireless headphones designed for convenient hands-free calls and wireless music enjoyment. They feature active noise cancellation (ANC) and are compatible with the Philips Headphones App for enhanced functionality.

Function Description:

These headphones allow users to:

Enjoy convenient wireless hands-free calls.
Listen to and control wireless music.
Switch seamlessly between calls and music.
Utilize Active Noise Cancellation (ANC) to reduce ambient noise.
Access a Voice Assistant.
Engage a "Busy mode" to signal unavailability.
Connect to a mobile phone or computer via Bluetooth.

Important Technical Specifications:

Battery: Rechargeable lithium polymer battery (200 mAh).
Music Time:
- ANC enabled with Bluetooth: 15 hours.
- ANC disabled with Bluetooth: 20 hours.
Talk Time: 20 hours.
Standby Time: ANC disabled with Bluetooth: 150 hours.
Charging Time: 2 hours (full charge).
Bluetooth Version: 5.0.
Compatible Bluetooth Profiles:
- HFP (Hands-Free Profile-HFP).
- A2DP (Advanced Audio Distribution Profile).
- AVRCP (Audio Video Remote Control Profile).
Supported Audio Codec: SBC.
Frequency Range: 20-20,000 Hz (Bluetooth).
Transmitter Power: < 10 dBm.
Operating Range: Up to 10 meters (33 feet).
Digital Echo & Noise Reduction: Yes.
Auto Power Off: Yes.
Charging Port: USB-C.
Water Resistance: IP54.
Operating Temperature: 0°C (32°F) to 40°C (104°F).
Storage Temperature: -10°C (14°F) to 45°C (113°F).
Operating Humidity: 8% - 90% RH (No condensation).
Storage Humidity: 5% - 90% RH (No condensation).
Maximum Operating Altitude: 3000m.

Usage Features:

Power On/Off and Pairing:
- Press and hold the power button (⑥) for 2 seconds to turn on (blue LED on for 3s).
- Press and hold the power button (⑥) for 2 seconds to turn off (blue LED flashes 1s and fades out).
- For pairing, press and hold the power button (⑥) for 5 seconds until white and blue LEDs flash alternately (remains in pairing mode for 2 minutes).
Charging: Connect the supplied USB-C charging cable to the USB-C charging slot (⑨) on the headphones and a charger/USB port of a computer. The LED indicator (①) turns white during charging and turns off when fully charged.
Music Control:
- Play or pause music: Press the power button (⑥) once.
- Adjust volume: Press +/- (③/⑦) once.
- Next track: Long press + (⑦) for 1s.
- Previous track: Long press - (③) for 1s.
Call Control:
- Pick up a call: Press the power button (⑥) once.
- Hang up a call: Press the power button (⑥) twice.
- Switch caller during a call: Press the power button (⑥) once.
Active Noise Cancellation (ANC):
- ANC ON: Press the ANC button (②) once.
- ANC OFF: Press the ANC button (②) once.
- Ambient Sound: Press the ANC button (②) once.
Voice Assistant: Touch and hold the Voice Assistant touch panel (⑧).
Busy Mode: Press both Volume + (⑦) and Volume - (③) simultaneously for 3 seconds to turn the Red LEDs on/off. A red LED flashes when on a call.
Quick Awareness: Touch the Quick awareness touch panel (⑩).
Connectivity to Computer: Plug the USB dongle into the computer (with USBC or USBA converter). The dongle will have a solid blue LED when connected. To reconnect, either plug out and plug in the dongle or press the button on the dongle once.
Automatic Reconnection: Headphones automatically reconnect to the last connected mobile phone/Bluetooth device when turned on.
Auto Power Off: If the headphones fail to connect to any Bluetooth device within range in 5 minutes, they will switch off automatically to save battery life (when ANC is off or in idle mode).

Maintenance Features:

Cleaning: Use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product. Avoid cleaning agents containing alcohol, ammonia, benzene, or abrasives.
Battery Care:
- Charge the battery for 2 hours before first use for optimum battery capacity and lifetime.
- The integrated battery shall not be exposed to excessive heat (sunshine, fire, etc.).
- Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut it, as this can result in an explosion.
- Avoid leaving the battery in extremely high or low temperature environments.
- The integrated battery is covered by European Directive 2013/56/EU and should not be disposed of with normal household waste. It should be taken to an official collection point or a Philips service center for professional removal and recycling.
Storage: Store within the specified temperature and humidity ranges to ensure optimal performance and battery life.
Ear Caps: Replaceable rubber ear caps (x3 pairs) are included for hygiene and fit.
Environmental Information: The product is designed with high-quality materials and components that can be recycled and reused. Packaging materials (cardboard, polystyrene foam, polyethylene) are also designed for easy separation and recycling.