Philips TAS1505 User Manual

4 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Charge the built-in battery
Turn on/off
To turn the speaker on, press and hold
" " for two seconds. You will hear the
prompt sound and Blue LED indicator
blinks.
Auto off in 15 minutes if no Bluetooth
connection.
5V
0.5 A
To turn the speaker off, press and hold
" " for two seconds. You will hear the
prompt sound and Blue LED indicator
turn off.
Charge the built-in battery
The speaker is powered by a built-in
rechargeable battery.
Connect the USB-C socket on the speaker to
an outlet (5V
0.5A) by using the provided USB
cable.
When the speaker is being charged,
Power on
LED is solid Red.
When the speaker is fully charged,
LED is solid Blue.
When the speaker is being charged,
Power o
LED is solid Red.
When the speaker is fully charged,
LED is o.
Note
·
Before use, fully charge the built-in battery.
·
The USB Type C socket is for charging only.
·
It takes you approximately two hours to fully charge
the battery.
·
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.

Philips TAS1505 Specifications

General

Brand	Philips
Model	TAS1505
Category	Speakers
Language	English