Philips TAT1109 - Reset the Earpieces; Technical Data

5 Reset the
earpieces
1
2
3
4
5
6
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
TAT1109 from the device list.

your Bluetooth device.
Take the earpieces out of the
charging case and press the button
once, then press and hold for 5
seconds.
Put the earpieces back to the
charging case.
Follow steps in “Use your earpieces-
connect the earpieces to your
Bluetooth device.”
Pair the earpieces with your
Bluetooth device, select Philips
TAT1109.
If you encounter any pairing or connection
issue, you can follow the following
procedure to reset your earpieces to
factory default settings.
6 Technical data
Music play time :

Charging time: 2 hours
Lithium-ion battery 40 mAh on
each earpiece, Lithium-ion battery
400 mAh on charging box
Bluetooth version: 5.4

- 
- A2DP (Advanced Audio

- AVRCP (Audio Video

Supported audio codecs: SBC
Frequency range: 2.402-2.480 GHz
Transmitter power: < 10 dBm
Operating range: Up to 10 meters
(33 feet)
USB-C port for charging
Low battery warning: available
Fast charging time: 15 mins charging
gives an hour playing
 
notice.
Note
10 EN