5 Reset the
earpieces
1
2
3
4
5
6
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
TAT6908 from the device list.
your Bluetooth device.
Return earpieces to charging box and
open the lid.
Press button on box twice.
Follow steps in “Use your earpieces-
connect the earpieces to your
Bluetooth device.”
Pair the earpieces with your Bluetooth
device, select Philips TAT6908.
If you encounter any pairing or connection
issue, you can follow the following
procedure to reset your earpieces to
factory default settings.
If there is no response from the
earpieces, you can follow the below step
to reset the hardware of your earpieces.
Return earpieces to charging box and
open the lid, press the button on box
for more than 10 seconds.
6 Technical data
Music play time (ANC on) :
7 + 21 hours
8 + 24 hours
Standby time: 200 hours
Charging time: 2 hours
Lithium-ion battery 63 mAh on
each earpiece, Lithium-ion battery
740 mAh on charging box
Bluetooth version: 5.3
• A2DP (Advanced Audio
• AVRCP (Audio Video Remote
Supported audio codecs: AAC, SBC
Frequency range: 2.402-2.480 GHz
Transmitter power: < 10 dBm
Operating range: Up to 10 meters
(33 feet)
USB-C port for charging
Low battery warning: available
notice.
Note
12 EN
To Next Page
Loading...
