Philips TAT8506 - Pairing with Another Bluetooth Device; Single Earpiece (Mono Mode)

Single earpiece (Mono mode)
Take either right or left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
You will hear a voice from the earpieces
saying “Power on”.
 The earpieces store 4 devices in the memory. If
you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
Pair the earpieces with
another Bluetooth device
Philips TAT8506
The following example shows you
how to pair the earpieces with
your Bluetooth device.
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAT8506.
Enter the earpieces' password
“0000” (4 zeros) if prompted. For
those devices featuring Bluetooth
3.0 or higher, there is no need to
enter a password.
 Take the second earpiece from the charging
box and they will pair with each other
automatically.
Note
Note
8 EN
If you want to pair another Bluetooth
device with the earpieces, just put them
into pairing mode, (press button on box
for 3 seconds with both earpieces inside
and the cover open), then discover the
second device as per normal pairing.
1
2