Philips V Series User Manual

7
2. Setting up the monitor
273V7QHS
5
42
2
4
AC power input
HDMI input
VGA input
HDMI audio out
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.

Philips V Series Specifications

General

Refresh Rate	75Hz
Aspect Ratio	16:9
Brightness	250 cd/m²
Flicker-Free	Yes
Low Blue Light Mode	Yes
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Response Time	4ms
Contrast Ratio	1000:1
Connectivity	HDMI, VGA
Viewing Angles	178° (H) / 178° (V)
VESA Mount	100 x 100 mm