23
Playback
Table of contents
6.2 Playing a recording back
Tip
• When the device is in the stop mode, playback will start with a
three-second rewind. This function is especially helpful during
transcription of recordings.
1
Select the required file as described.
2
Press ~ to playback the selected file.
X The record/play indicator will light green. The total playback
time of the current file will be shown on the display.
3
Press a and adjust the volume with h / b.
4
Press the ~ key to stop playback.
X The playback is paused at the current position. The device
returns to stop mode. When you resume playback, it will start
three seconds before the current position.
5
Press ~ to continue playback from the previous position.
6
Press h / b to jump to the start or the end of the file.
6.3 Adjusting playback speed
1
Press and hold the ~ key for at least two seconds during playback.
aThis will switch the device to slow playback. The c icon will be
displayed.
bThis will switch the device to fast playback. The U icon will be
displayed.
cThis will switch the device to normal playback. The S icon will
be displayed.
6.4 Quick search
You can scan backward or forward in the current file at a fast speed.
This allows to find a specific part of the recording.
1
Press and hold the h or b buttons during playback or when the
device is stopped
X to scan backward or forward in the current file at a fast
speed.
2
Release the key
X to resume playback at the selected speed form the current
position.
To Next Page
Loading...
