34
Settings
Table of contents
4
Press the record key, g, to confirm.
5
Press h / b to select the function On.
6
Press the record key, g, to confirm.
X If this feature is on, the saved images are output sequentially
to the display.
7
Press the ~ key to end demonstration mode.
8
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.
8.3 Device settings
8.3.1 Set date & time
The date and time entered are saved with each recording as the
recording time.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu ×.
3
Press h / b to select the function Date/time.
4
Press the record key, g, to confirm.
5
Press h / b to select the required year.
6
Press the record key g.
7
Press h / b to set the required month.
8
Press the record key g.
9
Press h / b to set the required day.
10
Press the record key g.
11
Press h / b to switch between the 12/24-hour system.
12
Press the record key g.
13
Press h/ b to set the hours.
14
Press the record key g.
15
Press h/ b to set the minutes.
16
Press the record key, g, to confirm.
17
Press the ~ key to exit the menu.
To Next Page
Loading...
