EasyManua.ls Logo

Philips Voice tracer DVT2500 - Setting Auto Divide

Philips Voice tracer DVT2500
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Settings
Table of contents
5
Press h / b to select the function On.
6
Press the record key, g, to confirm.
7
Press h / b to switch between voice activation level 1 (very
sensitive, the device switches on at low volume) and level 9 (lowest
sensitivity, the device turns on at higher volume). Press h / b
when the device is in recording mode to adjust the voice activation
level.
8
Press the record key, g, to confirm.
X If this feature is on, the icon is displayed.
9
Press h / b to select the Off function, to turn o voice
activation.
Tip
Press the ~ key to cancel the operation without saving and return
to stop mode.
8.1.8 Setting auto divide
You can automatically divide large recordings, such as a multi-hour
meeting recording. Once the set time has been reached, the device
stops the current recording and automatically starts a new one.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the recording settings menu Ó.
3
Press h / b to select the function Auto divide.
4
Press the record key, g, to confirm.
5
Press h / b, to select whether longer recordings are to be
automatically divided after 30 or 60 minutes, or switch the feature
o.
6
Press the record key, g, to confirm.
7
Press the ~ key to exit the menu.
Tip
Press the ~ key to cancel the operation without saving and return
to stop mode.

Table of Contents

Related product manuals