Philips Voice Tracer VTR5800 - Playback Settings; Repeat a File or Folder; Repeat a Sequence (A-B)

36 EN
EN 37
After the audio file is selected,
press the PLAY button shortly to play;
when playing, press shortly the MENU button to pop up
the following playing modes: Repeat, A-B Replay, Replay
times, and Replay gap, Play speed. See the below interface
reference:
Select Repeat shows in above picture,
then press MENU button to enter repeat modes selection
menu,
choose the repeat mode from the menu as shown in the
following picture:
Choose “A-B Replay” from the Playing Modes,
then press MENU button to enter A-B Replay. For
operations of A-B Replay please refer to A-B Replay
section in “Music playback”.
Repeat one: repeat the current file continuously.
Sequence: play from the current file to the last one in order,
and then it automatically stops playing.
Repeat folder: play all files in the current folder repeatedly.
Random: play randomly files in selected folder.
6.1 Playback settings
6.1.1 Repeat a file or folder
6.1.2 Repeat a sequence (A-B)
»
“Record/Play” indicator green light starts ashing,
press PLAY again to continue playing.
7 When playing, press or for a few seconds to fast
forward or backward.
•
1
•
•
2
•
3
Set A-B Repeat
Set the start mark: When playing, shortly press MENU
button to enter Playing Menu, then shortly press or
to select “A-B Replay” mode, then press MENU button to
return to Playing Menu. The “A” in “A-B” on LCD display
flickers, if you need to confirm the start point A , shortly
press to make confirmation.
Set the finish mark: After setting mark A, the “B” in “A-B”
on LCD display flickers, shortly press to set the finish
mark. The “A-B” is displayed on the LCD. As the replay
•
•
Sequence
Repeat folder
Repeat one
Random