Philips Voice Tracer VTR5800 - Display Memory Information; Format Device; Firmware Version; Set Date & Time

46 EN
EN 47
You can check the memory or Micro-SD capability and the
remaining memory of this device by using this function. See
the following picture:
You can check the device’s firmware version by using this
function.
See the System Time setting interface as follows:
On this interface, you can set the current system time and
display format. Press STOP return to the previous level
submenu.
For example: select “Time Format” to show the following
menu:
There are 2 time formats to choose, namely 12-hour format
and 24-hour format. The system default is 24-hour format.
Choose “Set data”, the following interface will pop up:
You can choose to format internal memory by using this
function. See the below picture:
9.5 Display memory information
9.7 Firmware version
9.8 Set date & time
9.6 Format device
Set time format
Set date
Set time
12 hours-
24-hours
Memory capacity
Remain. memory