How to search for a TV channel manually, you can read in
chapter 4 ’SPECIAL FEATURES’, ’Manual channel search’.
Note:
With the OK button you can interrupt the automatic chan-
nel search. All TV channels found will remain stored.
* If a TV channel transmits a ’TV channel identification’ (e.g.
’BBC1’), it appears in the display.
Setting the clock
If the time in the video recorder display is not correct or if
’--:--’ appears in the display, please set the clock manually.
1 Switch on the TV set.
2 Press the AUTOINSTALL button on the video recorder.
3 Confirm the line ’CLOCK’ with the OK button.
4 Adjust ’TIME’, ’YEAR’, ’MONTH’, ’DATE’ if required, using
the P q or P r button or the digit buttons 0-9 .
TIME 20:00
YEAR 1998
MONTH 01
DATE 01
------------------------
-/+ OK
5 Confirm each entry with the OK button.
Note: If a TV channel which transmits TXT/PDC is stored
with programme number ’P 01’, time (from TXT) and date
(from PDC) will automatically be taken from the TXT/PDC
information.
Manual Channel Number Allocation
You can give any desired programme number to the TV
channels stored.
1 Switch on the TV set. Press the AUTOINSTALL button on
the video recorder.
2 Select ’CHANNEL ALLOCATION’ with
the P q or P r button.
Confirm with the OK button.
3 Use the P r or P q button to select the TV channel on
the TV screen to which you wish to give a programme
number (starting with ’P 01’).
4 Confirm this allocation with the OK button.
If you wish to allocate further programme numbers, repeat
step 3 and step 4 until you gave a programme number
to all the required TV channels.
5 To end, press the STANDBY m button.
Note: If you want to delete an unwanted TV channel, press
the CLEAR (CL) button at step 3 .
* Monitor function: You can switch to and fro between TV
reception and video recorder reception with the
MONITOR button. This only functions when you used a scart
cable to connect the video recorder to your TV set and if
your TV set responds to this switch-over.
Allocating a decoder
With this function, the connected decoder will automatically
be activated for the TV programme required.
1 On the video recorder, select the TV programme you wish
to link with the decoder function, using the P q or
P r button or the digit buttons 0-9 .
2 Press the AUTOINSTALL button on the video recorder.
3 Select ’MANUAL SEARCH’ with the P q or P r button.
4 Confirm with the OK button.
5 Press the INDEX E button. In the display appears: ’DEC’
6 Confirm with the OK button.
7 To end, press the OK and the STANDBY m button.
5
To Next Page
Loading...
