Selecting the recording speed (SP or LP)
LP allows to double the recording duration on tape
(for example six hours instead of three hours on a
E180 cassette).
1.
1.Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.Press . The main menu will appear.
3.
3.Select 'RECORD SETUP' using or
and confirm with
.
4.
4.
Select 'RECORD SPEED' using
or
.
5.
5.Select the required recording speed with
.
6.
6.To end, press .
Automatic controlled recording from
a satellite receiver (RECORD LINK)
This function automatically starts recording on the
switched-off video recorder when a video signal is
recognised through the connected scart cable. If
your satellite receiver has a programming func-
tion, the recording will start automatically (as long
as the satellite receiver is switched on).
1.
1.
Use a scart cable to connect scart socket
AV2(DECODER) on the video recorder to the cor-
responding scart socket on the satellite receiver.
2.
2.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
3.
3.Press . The main menu will appear.
4.
4.Select 'RECORD SET UP' with or
and confirm with .
5.
5.Select 'RECORD LINK' with or
.
6.
6.Select function 'ON' with .
7.
7.To end, press .
8.
8.Insert a cassette.
9.
9.Programme the satellite receiver with the
required information (programme number of
the TV channel, start time, end time).
If necessary, please see the operating
instructions for your satellite receiver.
10.
10.Switch off the video recorder with .
The video recorder is now ready to record. The
beginning and end of the recording is controlled
via scart socket AV2(DECODER).
'Direct Record'
With Direct Record, you can record the right TV
channel in seconds even if your video recorder is
switched off. If the recording is started manually,
the video recorder uses the current TV channel
set on the TV. You will find more information on
how to switch 'Direct Record' on or off in the next
section. Make sure that your video recorder
socket (AV1/TV) and the TV are connected by a
scart cable.
1.
1.On the TV, select the programme number you
want make the recording from.
2.
2.Press with the video recorder
switched off.
3.
3.Stop recording with .
STOP C-L
REC I
STANDBY/ON
yy
STATUS/EXIT
FWD 1-B
STOP C-L
PLAY B-K
FWD 1-BSTOP C-L
PLAY B-K
MENU
STATUS/EXIT
FWD 1-B
STOP C-L
PLAY B-K
FWD 1-B
STOP C-L
PLAY B-K
MENU
'SP'/'LP' /'AUTO'
'SP': StandardPlay (normal recording speed)
offers the usual first-class picture quality.
'LP': LongPlay (half recording speed, double
recording time). 6 hours can be recorded on a 3-
hour cassette (E180) with a somewhat reduced
picture quality.
'AUTO':AUTOmatic Long Play. If there is not
enough space on the tape to record a pro-
grammed recording in standard speed, the record-
ing is automatically done in 'LP'. (Longplay).
Otherwise, the recording speed will be 'SP'
(Standardplay).
Switching off 'Record Link'
To switch off the function, select 'OFF'
with
.
FWD 1-B
SELECT KL CHOOSE B
RECORD SPEED [SP]
DIRECT RECORD [OFF]
→RECORD LINK [OFF]
END=EXIT
How does Direct Record work?
The video recorder compares the TV channel
selected on the TV set with its stored TV chan-
nels via the scart cable. If the same TV channel
is found, it switches the video recorder to the
corresponding programme number and starts
recording. Please do not change the TV chan-
nel on the TV set during the search so as not to
affect the process.
SELECT KL CHOOSE B
→RECORD SPEED [SP]
DIRECT RECORD [OFF]
RECORD LINK [OFF]
END=EXIT
EN
10
To Next Page
Loading...
