Battery
For your convenience, the Philodo battery can be removed.
Lock Open Install the battery
1. Insert the battery key into the keyport. Turn the key
counter-clockwise to open the lock.
2. Carefully slide the battery into the frame mount receptacle.
Turn the key clockwise to lock the battery on the frame. Then
remove the key.
NOTE:
1. When removing the battery, turn the key counter-clockwise
to open the lock. slide the battery upwards and lift it off the
frame.
2. When the battery is removed, be careful not to drop or
damage the battery. Avoid damaging the exposed connector
terminals and keep them clear of debris or water.
3. Do not force the battery into the receptacle. slowly align
and push the battery down into the receptacle.
4. Ensure the battery has been properly secured to the bike
before each use. Pulling carefully upwards on the battery with
both hands to test the security of the attachment of the
battery to the mount.
5. Before each use, close the battery lock and remove the key.
If the lock does not close or the key cannot be removed, the
battery has not been properly installed.
6. Keep the keys properly. If the unique keys are lost, you will
not be able to turn on the bike or replace the battery. If
necessary, you should get more spare keys. We don't have a
backup key.
To Next Page
Loading...
