What to do if Phocos Controller shows very low voltage?
If the battery voltage of your Phocos Controller is far too low (less than 16.8 V), check if the batteries and wiring are connected correctly, ensuring correct battery polarity. Then, re-charge or replace the battery.
What to do if Phocos Controller displays fault code 01?
If your Phocos Controller displays fault code 01, indicating a fan fault, replace the fan(s).
What to do if Phocos Controller output voltage is unbalanced?
If the output voltage of your Phocos Controller is unbalanced, it could be due to the battery not being connected correctly or an internal fuse blown. If the battery is connected correctly, please return to repair center.
What does error A006 mean on a Phocos Inverter?
If the Phocos Inverter shows error A006, it indicates a high frequency of the public grid.
Why does my Phocos Inverter show error A011?
If the Phocos Inverter displays error A011, it indicates that the public grid disconnected. Check if the inverter AC connection is correct.
What does error E005 mean on my Phocos Inverter?
If the Phocos Inverter displays error E005, this indicates an internal AC overcurrent.
What does error E018 mean on a Phocos Inverter?
If the Phocos Inverter shows error E018, this indicates a DC input overcurrent.
What does error E001 mean on a Phocos Inverter?
If the Phocos Inverter shows error E001, it indicates a DC input overvoltage.
What does error E003 mean on a Phocos Inverter?
If the Phocos Inverter shows error E003, it means there is an internal bus overvoltage.
What does error A004 mean on a Phocos Inverter?
If the Phocos Inverter shows error A004, it indicates a high voltage of the public grid.
General| Brand | Phocos |
|---|---|
| Model | Any-Grid Series |
| Category | Battery Charger |
| Language | English |
To Next Page
