If your conferencing space requires a daisy chain comprised of two or more mixers, use a
secondary mixer’s LINK UP port to connect to a preceding mixer’s LINK DOWN port. In this way
you can daisy chain up to 15 mixers comprised of one (1) primary unit chained to as many as 14
secondary units. MT700 Stingray Mixer settings default to secondary status and no
programming is required for a secondary mixer that is properly connected in a daisy chain.
When designating a primary mixer in a daisy chain, connect the primary mixer directly to a
communication mode – USB, SIP or analog. Use LINK DOWN to connect the primary mixer to a
secondary mixer, or to connect a secondary mixer to the next secondary mixer in its chain. Use
LINK UP to connect a secondary mixer to another secondary mixer or to a primary mixer that
precedes it in its chain. When you change the status of an MT700 Stingray Mixer from secondary
to primary, any subsequent secondary mixers automatically inherit the settings assigned to its
primary mixer.
The MT700 Stingray Mixer allows you to connect up to four (4) microphones or four (4) line-level
inputs, as well as four (4) loudspeakers. When serving a larger conferencing space, daisy
chaining together up to 15 total mixers enables you to connect a maximum of 60 microphones
and 60 loudspeakers.
To Next Page
Loading...