1. In this illustration, five (5) MT700 Stingray Mixers are grouped into three (3) zones,
referred to here as Zones A, B, and C. Zone A is assigned to rooms 1 and 2. Zone B is
assigned to rooms 3 and 4. Zone C is assigned to room 5 only. Configure the first primary
mixer for room 1, and a secondary mixer without primary settings for room 2. Next,
configure a primary mixer for room 3, and a secondary mixer without primary settings for
room 4. Finally, configure the mixer for room 5 as a primary mixer and connect no
secondary mixer(s). Each secondary mixer inherits the settings of its assigned primary
mixer.
To Next Page
Loading...